Wenxing Electric Technology Co., Ltd.

To create China's bus duct, cable tray, wire casing industry brand

High-tech enterprises, Guangdong famous brand products guangstock exchange equity code: 890666

News Center

News

Guangzhou Trunking Manufacturers Tell How to Choose Hot Galvanized Trunking


2022-09-27


  Guangzhou trunking manufacturersIt is said that galvanized trunking can not only play a good role in our home decoration, but also can be used well in other industrial decoration, so galvanized trunking is an indispensable material in our daily life. How can we easily choose the right galvanized trunking? Come and have a look with Bian Xiao.

Guangzhou trunking manufacturer said that hot-dip galvanized cable tray is assembled from hot-extruded glass fiber reinforced plastic pipes and is suitable for wires and cables, frequency conversion cables, lighting lamps and accessories, etc. Compared with the iron cable tray, it has the advantages of long service life, convenient installation, low cost, convenient laser cutting, maintenance free and so on. It is widely used in the laying of hot galvanized cable tray. Users in the choice of hot-dip galvanized cable tray manufacturers, should be in advance to understand the same industry market situation and the factory's business development, choose a good hot-dip galvanized cable tray manufacturers, to produce high-quality products, convenient for customers.

1. According to the selection rate of strong and weak power supply, the width and height of galvanized bridge should meet the requirements of filling rate. The general cable filling rate can reach 40%-50%, and the control cable filling rate can reach 50%-70%. It is best to leave 10%-25% of the development margin.

2. Long-span bridges shall be verified. For steel bridges with a span of more than 6m and aluminum alloy bridges with a span of more than 2m or a load-bearing requirement greater than load level D, strength, rigidity and stability calculations or tests shall be carried out according to engineering conditions.

3. The load level should be greater than the budgeted level. When selecting the load level of the ladder galvanized bridge, the working uniform load of the bridge should not be greater than the rated uniform load of the selected bridge load level. If the actual span of bridge supports and hangers is not equal to 2m, the working uniform load shall meet the requirements.

4. Components to be matched. Under the condition that various components and supports and hangers meet the corresponding load, their specifications and dimensions shall match the straight and curved section series of pallets and ladders.

5. Select materials according to the use environment. If the ladder-shaped galvanized bridge, trunking and its supports and hangers are used in corrosive environment, corrosion-resistant rigid materials shall be adopted, or anti-corrosion treatment conforming to the requirements of engineering environment and durability shall be adopted.

When choosing a galvanized bridge, you can easily choose a suitable bridge according to the above techniques, which can not only save time, but also save investment and reduce unnecessary waste.


Pay attention to WeChat public number

Contact Us

National Service Hotline

+86-400-883819

©2023 All Rights Reserved Wenxing Electric Technology Co., Ltd.Powered by:www.300.cn

SAF Coolest v1.3.1.1 设置面板HHFSX-AJEI-YZXAE-SWF

图片ALT信息: Wenxing Electric

无数据提示

Sorry, the current column has no content for the time being.!

You can view other columns or returnHome Page

V1.3.1 SVG图标库请自行添加图标,用div包起来,并命名使用